WHY SMARTY?

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Maecenas metus nulla, commodo a sodales sed, dignissim pretium nunc. Nam et lacus neque. Ut enim massa, sodales tempor convallis et, iaculis ac massa.

CONTACT INFO
  • Address:2324 Cheney-Spokane Road
    Cheney, Washington 99004 USA
  • Phone:800-614-9958 / +1 509-209-9835
  • Email: sales@pswitchers.com
Modular Input Board Assembly for Composite and Baseband AV Devices
  • Composite Video (RCA Coaxial)
  • Unbalanced Stereo Audio via RCA
  • Built-In ESD Protection
  • Field Upgradable, Modular Assembly
  • LEDs for Power and Signal Detection

Composite Video plus Stereo Input Board Assembly

The IN603, Composite Video Input Board Assembly is a PS600 Series input board compatible with all PS600 Series enclosures, such as the PS650. This board is used to connect composite video, baseband (NTSC, PAL, SECAM) sources to the presentation system. Video signals are converted but not scaled for the display device. Audio is digitized and combined with the digitized video image for distribution the display devices.

Composite Video plus Stereo Input Board Assembly

The IN603, Composite Video Input Board Assembly is a PS600 Series input board compatible with all PS600 Series enclosures, such as the PS650. This board is sold seperately or part of a complete system.

INSTALLATION

Installation is quick and painless. UNPLUG THE POWER CORD ATTACHED TO THE ENCLOSURE. Simply remove the single mounting screw that holds the IN600 Future Expansion Plate or other card where you plan to install the IN603. After removing the old plate, insert the new IN603 assembly. Replace the screw and reattach the power cord. The system automatically recognizes the new board installed so no further activity is required. However, in some cases, it may be necessary to adjust the audio trim to level the input amplitude to a nominal level. See the Installation Manual for more details regarding audio adjustments.

NO DIAGRAM AVAILABLE

SPECIFICATIONS

VIDEO INPUT

  • 1 RCA, CVBS (Composite), female, yellow
  • Format: NTSC, PAL, SECAM
  • Gain: Unity
  • Bandwidth: 10 MHz at -3dB
  • Voltage: up to 1.00 V
  • Impedance: 75 Ohm
  • Indicators: 1 LED (Red = Power, Green = Video Signal Present on Input, and White = Source selected)

AUDIO INPUT

  • 2 RCA, unbalanced stereo, female
  • Gain: +6 dB
  • Freq Resp: 20 Hz to 20 kHz, +/- 0.05 dB
  • THD+N: 0.01% @ 1 kHz at nominal level
  • S/N: > 90 dB at Vin = 0 V, A-Weighted
  • Crosstalk: < -45 dB @ 20 kHz, -70 dB @ 1 kHz or below
  • Separation: > 90 dB @ 20 Hz to 20 kHz
  • Impedance: > 10k Ohms unbalanced, AC coupled
  • Nom Level: -10 dBV (316 mVrms)
  • Max Level: -6 dBV (500 mVrms), unbalanced at 1% THD+N
NOTE: 0dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV approx equals 2 dBu

DIMENSIONS (H x W x D)

3.0" x 1.2" x 6.0" (7.6 x 3.0 x 15.2 cm)

WEIGHT / SHIPPING

0.50 lbs (0.3 kg), Net
1.00 lbs (0.6 kg), Package Weight
Vibration: ISTA 1A in carton (International Safe Transit Association)

ENVIRONMENTAL

Storage: -25° C to +75° C (-13° F to +167° F), Humidity: 10% to 90%, non-condensing
Operating: 0° C to +50° C (+32° F to +122° F), Humidity: 10% to 90%, non-condensing
ESD Protection: +/- 2kV based on the Human Body Model

CERTIFICATIONS

Safety: CE
EMI/EMC: CE
Environmental: RoHS

WARRANTY / MTBF

3 Years, Parts & Factory Labor
MTBF: 30,000 hours (estimated)





Note: All nominal levels are +/- 10%. Note: Specifications are subject to change without notice.