WHY SMARTY?

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Maecenas metus nulla, commodo a sodales sed, dignissim pretium nunc. Nam et lacus neque. Ut enim massa, sodales tempor convallis et, iaculis ac massa.

CONTACT INFO
  • Address:2324 Cheney-Spokane Road
    Cheney, Washington 99004 USA
  • Phone:800-614-9958 / +1 509-209-9835
  • Email: sales@pswitchers.com
Modular Input Board Assembly for High Speed Digital DisplayPort Devices
  • DisplayPort Digital Video, Apple/Mac Format
  • 3 Gbps, 300 Mhz TMDS Clock Rates
  • HDTV Resolutions up to 4K @ 30 Hz
  • HDCP V1.3
  • EDID: Passthru or Table Lookup, selectable
  • Indicators: 1 LED (Red = Power, Green = Video Signal Present on Input, and White = Source selection)

DisplayPort Input Board Assembly

The IN605, DisplayPort Input Board Assembly is a PS600 Series input board compatible with all PS600 Series enclosures, such as the PS650. This board is used to connect audio-visual source devices using the DisplayPort Apple/Mac standard.

DisplayPort Input Board Assembly

The IN605, DisplayPort Input Board Assembly is a PS600 Series input board compatible with all PS600 Series enclosures, such as the PS650. This board is sold seperately or part of a complete system.

INSTALLATION

Installation is quick and painless. UNPLUG THE POWER CORD ATTACHED TO THE ENCLOSURE. Simply remove the single mounting screw that holds the IN600 Future Expansion Plate or other card where you plan to install the IN605. After removing the old plate, insert the new IN605 assembly. Replace the screw and reattach the power cord. The system automatically recognizes the new board installed so no further activity is required. However, in some cases, it may be necessary to adjust the audio trim to level the input amplitude to a nominal level. See the Installation Manual for more details regarding audio adjustments.

NO DIAGRAM AVAILABLE

SPECIFICATIONS

VIDEO INPUT

  • 1 DisplayPort, female
  • HDMI V1.4b, single link
  • 3 Gbps, 300 MHz TMDS clock rates
  • Supports 1, 2, and 4 lanes at both 1.62 Gbps and 2.7 Gbps data rates
  • HDTV Resolutions up to 4K @ 30Hz
  • HDCP V1.3
  • EDID: Passthru or Table Lookup, selectable
  • Built-in automatic receiver equalization
  • Supports both full link training and no link training operation
  • Video input formats: RGB up to 12 bpc, YCbCr4:4:4 -4:2:2 up to 12 bpc
  • Supports reduced blanking or reduced refresh rate timing modes
  • 24-bit audio sample size, up to 88 kHz sample rate
  • Indicators: 1 LED (Red = Power, Green = Video Signal Present on Input, or White = Source selected)

DIMENSIONS (H x W x D)

3.0" x 1.2" x 6.0" (7.6 x 3.0 x 15.2 cm)

WEIGHT / SHIPPING

0.50 lbs (0.3 kg), Net
1.00 lbs (0.6 kg), Package Weight
Vibration: ISTA 1A in carton (International Safe Transit Association)

ENVIRONMENTAL

Storage: -25° C to +75° C (-13° F to +167° F), Humidity: 10% to 90%, non-condensing
Operating: 0° C to +50° C (+32° F to +122° F), Humidity: 10% to 90%, non-condensing
ESD Protection: +/- 12kV based on the Human Body Model

CERTIFICATIONS

Safety: CE
EMI/EMC: CE
Environmental: RoHS

WARRANTY / MTBF

3 Years, Parts & Factory Labor
MTBF: 30,000 hours (estimated)





Note: All nominal levels are +/- 10%. Note: Specifications are subject to change without notice.