WHY SMARTY?

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Maecenas metus nulla, commodo a sodales sed, dignissim pretium nunc. Nam et lacus neque. Ut enim massa, sodales tempor convallis et, iaculis ac massa.

CONTACT INFO
  • Address:2324 Cheney-Spokane Road
    Cheney, Washington 99004 USA
  • Phone:800-614-9958 / +1 509-209-9835
  • Email: sales@pswitchers.com
Modular Input Board Assembly for High Speed Component Video Devices
  • RGB High-Res Component or Baseband NTSC, PAL, SECAM
  • Resolutions: 525i, 625i, 525p, 625p, 720p, 1080i, 1080p
  • Supports 720p at 24 Hz/25 Hz formats
  • Macrovision copy protection detection on component formats (525i, 625i, 525p, and 625p)
  • Samples stereo audio and injects into digital video output stream
  • Built-in ESD Protection
  • Field Upgradable, Modular Assembly
  • LEDs for Power and Signal Detection

Component plus Stereo Input Board Assembly

The IN606, Component Input Board Assembly is a PS600 Series input board compatible with all PS600 Series enclosures, such as the PS650. This board is used to connect audio-visual source devices using the Y, Pb, Pr (Component, RGB High Res) and RGB (RGB/NTSC/PAL) standards.

Component plus Stereo Input Board Assembly

The IN606, Component Input Board Assembly is a PS600 Series input board compatible with all PS600 Series enclosures, such as the PS650. This board is sold seperately or part of a complete system.

INSTALLATION

Installation is quick and painless. UNPLUG THE POWER CORD ATTACHED TO THE ENCLOSURE. Simply remove the single mounting screw that holds the IN600 Future Expansion Plate or other card where you plan to install the IN606. After removing the old plate, insert the new IN606 assembly. Replace the screw and reattach the power cord. The system automatically recognizes the new board installed so no further activity is required. However, in some cases, it may be necessary to adjust the audio trim to level the input amplitude to a nominal level. See the Installation Manual for more details regarding audio adjustments.

NO DIAGRAM AVAILABLE

SPECIFICATIONS

VIDEO INPUT

  • 3 RCA, YPrPb (Component), female
  • Format: RGB High-Res Component or Baseband NTSC, PAL, SECAM
  • Resolutions: 525i, 625i, 525p, 625p, 720p, 1080i, 1080p, and many other HDTV formats are supported
  • Supports 720p at 24 Hz/25 Hz formats
  • Macrovision copy protection detection on component formats (525i, 625i, 525p, and 625p)
  • Gain: Unity
  • Voltage: up to 1.00 V
  • Impedance: 75 Ohm
  • Indicators: 1 LED (Red = Power, Green = Video Signal Present on Input, and White = Signal selected)

AUDIO INPUT

  • 1 3.5mm, Mini Audio Jack (TRS), unbalanced stereo, female
  • Gain: +6 dB
  • Freq Resp: 20 Hz to 20 kHz, +/- 0.05 dB
  • THD+N: 0.01% @ 1 kHz at nominal level
  • S/N: > 90 dB at Vin = 0 V, A-Weighted
  • Crosstalk: < -45 dB @ 20 kHz, -70 dB @ 1 kHz or below
  • Separation: > 90 dB @ 20 Hz to 20 kHz
  • Impedance: > 10k Ohms unbalanced, AC coupled
  • Nom Level: -10 dBV (316 mVrms)
  • Max Level: -6 dBV (500 mVrms), unbalanced at 1% THD+N
  • Indicators: 1 LED (Red = Power, Green = Video Signal Present on Input)
NOTE: 0dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV approx equals 2 dBu

DIMENSIONS (H x W x D)

3.0" x 1.2" x 6.0" (7.6 x 3.0 x 15.2 cm)

WEIGHT / SHIPPING

0.50 lbs (0.3 kg), Net
1.00 lbs (0.6 kg), Package Weight
Vibration: ISTA 1A in carton (International Safe Transit Association)

ENVIRONMENTAL

Storage: -25° C to +75° C (-13° F to +167° F), Humidity: 10% to 90%, non-condensing
Operating: 0° C to +50° C (+32° F to +122° F), Humidity: 10% to 90%, non-condensing
ESD Protection: +/- 2kV based on the Human Body Model

CERTIFICATIONS

Safety: CE
EMI/EMC: CE
Environmental: RoHS

WARRANTY / MTBF

3 Years, Parts & Factory Labor
MTBF: 30,000 hours (estimated)





Note: All nominal levels are +/- 10%. Note: Specifications are subject to change without notice.