WHY SMARTY?

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Maecenas metus nulla, commodo a sodales sed, dignissim pretium nunc. Nam et lacus neque. Ut enim massa, sodales tempor convallis et, iaculis ac massa.

CONTACT INFO
  • Address:2324 Cheney-Spokane Road
    Cheney, Washington 99004 USA
  • Phone:800-614-9958 / +1 509-209-9835
  • Email: sales@pswitchers.com
Modular Input Board with Dual HDMI and VGA Input Connectors
  • Combination one HDMI & one VGA Inputs
  • Automatically Switches to most recent Active Source
  • Built-in ESD Protection
HDMI:
  • Resolutions up to 1080p@60 or 4K @ 24Hz
  • 297 MHz TMDS Max Clock Rate
  • HDCP V1.4
  • Digital Audio: Dolby TrueHD, Dolby Digital Plus, DTS HD Master Audio
VGA:
  • RGBHV Computer Resolutions to 1920 X 1200
  • 3.5mm Stereo Audio Input
  • Converts Analog Video to Digital
  • Combines Audio with Video on Digital Outputs

Dual HDMI and VGA Input Auto-Switching Board Assembly

The IN607, Dual HDMI and VGA Input Board Assembly is a PS600 Series input board compatible with all PS600 Series enclosures, such as the PS650. This board is used to connect audio-visual source devices using the HDMI and VGA connector standards. By default, the output from this card, and selectable by the enclosure, is the most recently active signal. For example, if a user connects to the HDMI input with a laptop and the laptop begins to generate an output signal it is that output which will be available to the enclosure for display. If a user later connects a device to the VGA connector and generates a signal, the IN607 board will immediately switch to that signal and make that image available for the enclosure to route to the appropriately selected display.

HDMI + VGA Auto-Switching Input Board Assembly

The IN607, Dual HDMI and VGA Input Board Assembly is a PS600 Series input board compatible with all PS600 Series enclosures, such as the PS650. This board is sold seperately or part of a complete system.

INSTALLATION

Installation of the IN607 is quick and painless. The IN607 is a hot swappable card. To install the card, simply remove the single mounting screw that holds the IN600 Future Expansion Plate or other card where you plan to install the IN607. After removing the old plate, insert the new IN607 assembly. With proper alignment less than 1 foot pound of pressure is required to insert the card. Replace the screw to ensure the card is securely mounted in the chassis. Once installed, the system automatically recognizes the new board. No further activity is required. However, in some cases, it may be necessary to adjust the audio input trim to a nominal input level. See the Installation Manual for more details regarding audio input adjustments.

NO DIAGRAM AVAILABLE

SPECIFICATIONS

HDMI VIDEO INPUT

  • 1 HDMI, Type A, female, single link
  • HDMI 1.4a, EIA/CEA-861D
  • 297 MHz Max TMDS Clock Rate
  • HDTV Resolutions up to 1080p @ 60 Hz, 720p/1080i @ 120 Hz, or 4K @ 24Hz
  • PC Resolutions up to WUXGA (1920 X 1200)
  • HDCP V1.4
  • EDID: Passthru or Table Lookup, selectable
  • Indicators: 1 LED (Red = Power, Green = Video Signal Present on Input, or White = Source selected)

VGA VIDEO INPUT

  • 1 HD-15, RGBHV, female
  • PC Resolutions up to 1920 X 1080p or UXGA (1600 X 1200) @ 60Hz
  • Voltage: 0.63 V to 0.9 Vp-p on R, G, and B
  • Impedance: 75 Ohm
  • EDID: Passthru or Table Lookup, selectable

AUDIO INPUT (USED WITH VGA SOURCE ONLY)

  • 1 3.5mm, Mini Audio Jack (TRS), unbalanced stereo, female
  • Gain: 0 dB
  • Freq Resp: 20 Hz to 20 kHz, +/- 0.05 dB
  • THD+N: 0.01% @ 1 kHz at nominal level
  • S/N: > 90 dB at Vin = 0 V, A-Weighted
  • Crosstalk: < -45 dB @ 20 kHz, -70 dB @ 1 kHz or below
  • Separation: > 90 dB @ 20 Hz to 20 kHz
  • Impedance: > 10k Ohms unbalanced, AC coupled
  • Nom Level: -10 dBV (316 mVrms)
  • Max Level: +6 dBV (2 Vrms), unbalanced at 1% THD+N
NOTE: 0dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV approx equals 2 dBu

DIMENSIONS (H x W x D)

3.0" x 1.2" x 6.0" (7.6 x 3.0 x 15.2 cm)

WEIGHT / SHIPPING

0.50 lbs (0.3 kg), Net
1.00 lbs (0.6 kg), Package Weight
Vibration: ISTA 1A in carton (International Safe Transit Association)

ENVIRONMENTAL

Storage: -25° C to +75° C (-13° F to +167° F), Humidity: 10% to 90%, non-condensing
Operating: 0° C to +50° C (+32° F to +122° F), Humidity: 10% to 90%, non-condensing
ESD Protection: +/- 2kV based on the Human Body Model

CERTIFICATIONS

Safety: CE
EMI/EMC: CE
Environmental: RoHS

WARRANTY / MTBF

3 Years, Parts & Factory Labor
MTBF: 30,000 hours (estimated)





Note: All nominal levels are +/- 10%. Note: Specifications are subject to change without notice.