WHY SMARTY?

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Maecenas metus nulla, commodo a sodales sed, dignissim pretium nunc. Nam et lacus neque. Ut enim massa, sodales tempor convallis et, iaculis ac massa.

CONTACT INFO
  • Address:2324 Cheney-Spokane Road
    Cheney, Washington 99004 USA
  • Phone:800-614-9958 / +1 509-209-9835
  • Email: sales@pswitchers.com
Modular Input Board with HDBaseT Input Connector
  • HDBaseT VS2310 "Colligo" Standards-Based Receiver
  • HDTV Resolutions up to 4K @ 30Hz and 1080p @ 60Hz
  • HDMI V1.4b
  • HDCP V1.4
  • Distance: 100m (328 Ft) for 4K, 150m (492 Ft) for 1080p
  • Power over Ethernet/HDBaseT: up to 30W

HDBaseT Input Board Assembly

The IN608, HDBaseT Input Board Assembly is a PS600 Series input board compatible with all PS600 Series enclosures, such as the PS650. This board is used to connect audio-visual source devices using the HDBaseT connector, communications, and power standards.

HDBaseT devices may be connected to the IN608 using CAT5e/CAT6 cables up to 492 feet away. Power over Ethernet (PoE) may be used to power the HDBaseT device with support for up to 30W of power. The IN608 conforms to the HDBaseT standards requirement to support a wide variety of HDBaseT devices even if they are not produced by Presentation Switchers.

HDBaseT Input Board Assembly

The IN608, HDBaseT Input Board Assembly is a PS600 Series input board compatible with all PS600 Series enclosures, such as the PS650. This board is sold seperately or part of a complete system.

INSTALLATION

Installation of the IN608 is quick and painless. The IN607 is NOT a hot swappable card. Remove power to the PS600 Enclosure first. To install the card, simply remove the single mounting screw that holds the IN600 Future Expansion Plate or other card where you plan to install the IN608. After removing the old plate, insert the new IN608 assembly. With proper alignment less than 1 foot pound of pressure is required to insert the card. Replace the screw to ensure the card is securely mounted in the chassis. Power the system. The system automatically recognizes the new board. No further activity is required. However, in some cases, it may be necessary to adjust the audio input trim to a nominal input level. See the Installation Manual for more details regarding audio input adjustments.

When connecting an IN608 to a HDBaseT device requiring power (e.g. a PD device), there is nothing required for the user to do. The IN608 will automatically begin powering the HDBaseT device and begin receive the audio and video signal.

NO DIAGRAM AVAILABLE

SPECIFICATIONS

HDBaseT VIDEO INPUT

  • 1 HDBaseT (VS 2310 Rx Colligo) Input, RJ45, female
  • HDMI 1.4b, EIA/CEA-861D
  • 3 Gbps, 300 MHz TMDS clock rate
  • HDTV Resolutions up to 4K @ 30Hz @ 100m (328 ft) or 1080p @ 60Hz up to 150m (492 ft)
  • PC Resolutions up to WUXGA (1920 X 1200)
  • HDCP V1.4
  • EDID: Passthru or Table Lookup, selectable
  • Indicators: 1 LED (Red = Power, Green = Video Signal Present on Input, or White = Source Selected)

DIMENSIONS (H x W x D)

3.0" x 1.2" x 6.0" (7.6 x 3.0 x 15.2 cm)

WEIGHT / SHIPPING

0.50 lbs (0.3 kg), Net
1.00 lbs (0.6 kg), Package Weight
Vibration: ISTA 1A in carton (International Safe Transit Association)

ENVIRONMENTAL

Storage: -25° C to +75° C (-13° F to +167° F), Humidity: 10% to 90%, non-condensing
Operating: 0° C to +50° C (+32° F to +122° F), Humidity: 10% to 90%, non-condensing
ESD Protection: +/- 2kV based on the Human Body Model

CERTIFICATIONS

Safety: CE
EMI/EMC: CE
Environmental: RoHS

WARRANTY / MTBF

3 Years, Parts & Factory Labor
MTBF: 30,000 hours (estimated)





Note: All nominal levels are +/- 10%. Note: Specifications are subject to change without notice.