WHY SMARTY?

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Maecenas metus nulla, commodo a sodales sed, dignissim pretium nunc. Nam et lacus neque. Ut enim massa, sodales tempor convallis et, iaculis ac massa.

CONTACT INFO
  • Address:2324 Cheney-Spokane Road
    Cheney, Washington 99004 USA
  • Phone:800-614-9958 / +1 509-209-9835
  • Email: sales@pswitchers.com
2 HDMI Inputs X 1 HDMI Output
  • High Resolution: 4K@30 4:4:4, 4K@60 4:2:0
  • Auto-Sense / Auto-Switching
  • Display Control (Auto-Power On/Off)
  • Proximity Sensor (Auto-Power On/Off)
  • Ethernet, RS232, or USB Controllable
  • Flexible Under Table Mountable Design (Standard)
  • Drag-and-drop Firmware Updating

Introducing the PS105. This 2 X 1 HDMI under-table mountable auto-switcher is PS' latest AV+IoT presentation switcher designed for smaller conference rooms and collaboration spaces. The PS105 works exceptional as a standalone 2 X 1 auto-sensing auto-switcher with CEC display control. Its integrated proximity sensor adds another layer of protection shutting down the display when people leave the room. PS105 is compatible with PS’ Cloud Control, Amazon AWS Service.

  • Collaborative Workspaces
    • Turns on display when users connects laptop; turns off when disconnected.<\li>
    • Automatically displays last device connected<\li>
    • Proximity sensors turns display off when everyone has left the room.
    • Compatible with Cloud Control, PS' Web-Based Management System<\li>
    • Under table mounting kit, included
    • Drag-and-drop firmware updating feature

  • Corporate Boardroom & Higher Education Centers
    • Turns on display when users connects laptop; turns off when disconnected.<\li>
    • Automatically displays last device connected<\li>
    • Negotiates best resolution for cleanest clearest video content
    • Proximity sensors turns display off when everyone has left the room.
    • Compatible with Cloud Control, PS' Web-Based Management System<\li>
    • Under table mounting kit, included
    • Drag-and-drop firmware updating feature

PS111 4 X 1 HDMI and VGA Switcher with Audio Line Output

The PS111 is a next generation super high resolution 3 HDMI & 1 VGA to 1 HDMI output switcher with stereo audio output extracted from the selected source. This switcher supports a wide range of HDTV and PC/VESA resolutions up to 4K2K (3840x2160). Users are able to select a source by pressing the push-button selector located on the front of the unit or by using an IR (infra-red) remote. Each system ships with an under-table mounting kit for small boardrooms and conference room tables. By default, the PS111 allows sources to negotiate the preferred output resolution by interfacing directly with the room’s display. An EDID selector feature is used to optionally force sources to output a specific resolution.

AUTO-SWITCHER

The PS111 has a unique auto-sense, auto-switch feature that automatically switches to the source when a new source is connected to the system. For example, HDMI-4 could be used for the home room computer and HDMI-3 used for the local document camera. VGA-1 and HDMI-2 are used for the guest lecturer podium. When a guest connects his/her laptop, the signal automatically will appear on the display. This automation often removes the necessity of costly control systems within a classroom.

4K2K

1080p is no longer the highest resolution standard for consumer products. 4K2K (3840x2160) or “Ultra HDTV” is quickly becoming the new standard, especially in larger flat panel display systems. The PS100 supports a wide array of HDTV and PC/VESA resolutions - including the new 4K2K standard.

AUDIO OUTPUT

Often, the sound coming from a flat panel display or projector is inadequate for smaller boardrooms, conference rooms, and collaborative presentation spaces. In these situations the audio from the PS100 is connected to a set of local powered speakers. Whether the source is a desktop computer, laptop, iPad™, or BluRay™ player with HDCP encrypted content, the audience will hear everything. In some classroom situations, audio from the PS100 is wired to an integrated microphone mixer then to the speakers for microphone “voice lift” support within the classroom.

PUSH-BUTTON CONTROL

Simple push-button source selection makes controlling the PS100 simple. LEDs on the front panel always indicate which source has been selected.

EDID

Most source devices send an electronic inquiry to the display asking for information about it’s capabilities. The display sends a table of information called the Extended Display Identification Data (EDID). Using this information, the source device changes it’s resolution to match the native resolution of the display or some other resolution that is supported by both source and display. The PS100 intercepts the display’s response to the EDID table request and sends its own EDID information to “trick” the source into sending it’s content in a particular resolution and/or audio format. This method allows us to change the resolution of the source device without reprocessing the video image and degrading the quality of the native image. The EDID Resolution Select rotary dial can the modified using a standard screw driver to change the EDID table information being sent to the source device.

IR CONTROL

An IR (infra-red) remote ships with each PS100 for simple source selection. Many 3rd party controllers, such as Crestron, AMX, Extron, FSR, HRS, and others provide additional controllers that can control the PS100. These controllers include wall-mount, table-top, and tilt-up button and color touch-panel controllers.

LOW PROFILE

The small foot print of the PS100 make this product perfect for under-table solutions keeping the electronics well away from knees and feet of end-users.

HDCP

Full HDCP (High Definition Content Protection) compliant.

APPLICATION DIAGRAM

Click on Image to Enlarge

SPECIFICATIONS

DIMENSIONS (H x W x D)

  • 4.00" x 4.00" x 1.187" (102 x 102 x 30.15mm), without brackets
  • Rack Units: 1 (this is designed as an under-table mount)

WEIGHT

0.70 lbs ( 0.32 kg)

POWER

5 VDC, 2A, 4 Watts

ENCLOSURE

Metal with black matte finish and special blue hammertone finish on cover finish

VIDEO INPUT

  • HDMI Input: (2) HDMI Type A, female
    6.75 Gbps (3.00 Gbps per color), 297 MHz
    HDMI V1.4b, EIA/CEA-861D
    HDCP: Supported.
    RESOLUTIONS, HDTV: 480i@29.97/30/60/119.88/120Hz, 480p@59.94/119.88/120/240Hz,
    576i@25,50,100Hz, 576p@50/100/200Hz, 720p@50/59.94/60/100/119.88/120Hz,
    1080i@25/29.97/30/50/59.94/60Hz, 1080p@23.976/24/29.97/30/50/59.94/60Hz,
    3840x2160@30Hz (4K/2K)
    RESOLUTIONS, PC/VESA: 640x350@85Hz, 640x400@85Hz, 640x480@60/67/73/75/85Hz,
    720x400@85, 800x600@56/60/72/75/85Hz, 832x624@75Hz, 852x480@60Hz, 1024x576@60Hz,
    1024x768@42/60/70/75/85Hz, 1152x864@75Hz, 1152x870@75Hz, 1280x768@60/75/85Hz,
    1280x960@60/85Hz, 1280x1024@60/75/85Hz, 1360x768@60Hz, 1365x1024@60/75Hz,
    1400x768@60Hz, 1400x1050@60Hz, 1440x960@72Hz, 1600x1024@60Hz, 1600x1200@60Hz,
    1680x1050@60Hz, 1920x1080@60Hz, 1920x1200@60Hz
  • EDID Management: Selectable by Table or Passthru to Display
    2160p@30Hz,1080p@60Hz,720p@60Hz,576p@50Hz,480p@60Hz,1920x1200@60Hz,1600x1200@60Hz,1400x1050@60Hz, 1280x1024@60Hz,1280x768@60Hz,1024x768@60Hz,800x600@60Hz

VIDEO OUTPUT

  • HDMI Output: (1) HDMI Type A, female
    6.75 Gbps (3.00 Gbps per color), 297 MHz
    HDMI V1.4b, EIA/CEA-861D
    HDCP: Supported.

CONTROL PORTS

  • Ethernet: (1) RJ-45, female
    Standard: IEEE 802.3, 10/100Mbps, Auto-selecting Standard: Telnet, TCP/IP
  • RS-232: (1) DB-9, female
    Speed: 115,200 Baud, 8-bit, No parity, 1 stop bit, fixed
  • USB: (1) USB, Type Mini-B, 5-pin, female
    Method: USB-CDC, (same RS-232 interface specs)

CERTIFICATION

  • CE, RoHS
ENVIRONMENTAL
  • Storage Temperature: -20°C to 70°C (-4°F to 140°F),
    Humidity: 10% to 90%, non-condensing
  • Operating Temperature: 0°C to 35°C, (32°F to 95°F),
    Humidity: 10% to 90%, non-condensing

WARRANTY

1 Year, Parts & Factory Labor







Note: Specifications are subject to change without notice.